Iron

The Kittiwake Photometer
A Kittiwake Comparator
Click image to enlarge

Iron is naturally present in water supplies and its presence in both potable and industrial applications is regarded as objectionable.

Kittiwake's extensive range of water test kits for iron begin with colour card and checkit tests for basic analysis; comparator tests give a greater accuracy and the Smart 2 Photometer measures from 10 ppb to 10 ppm Iron.

Iron impairs potable water taste and will also stain pipework, fittings and swimming pool surfaces. Iron will stain or mark laundered materials and deposits often cause problems with agricultural water feed lines if not removed periodically.

Soluble iron in industrial water systems is indicative of corrosion. Spikes in measured concentrations require prompt investigation to determine the cause.

The table below gives a chart of recommended tests.
R = Recommended X = Suitable for use

Call Kittiwake Call us now on +44 1903 731470 to discuss your specific needs, or visit our global network page for offices or dealers near you.

Iron

  Comparator Photometer Checkit Test Strips Colour Card
 Boiler Treatment X X  
 Cooling Towers & Systems X  R X X X
Waste Water & Sewage Waste Water & Sewage X  R X    
Agriculture & Hydroponics X  R X  
Sanitisation (Food & Beverage, Laundry, Dairy, Warewash) X X R X  


 Product Table

Code Product Range Tests per pack No. Reagents
AS-K28241-KW Iron spot tester (on fabric) Trace  120 2 x 65ml, 1 x pot 
AS-K24982-KW Iron (Total Soluble) Smart II Photometer 0 - 3.0ppm Fe  1 unit  1 x sachets
AS-K22204-KW Iron HR Smart II Photometer 0-10ppm Fe 1 unit 2 x 65 ml
AS-K22199-KW Iron LR Smart II Photometer 0-2ppm Fe2+ & Fe3+ 1 unit 3 x 65 ml
FG-K28214-KW Iron LR ECON Comparator 0-3.0 ppm Fe 100 1 (sachets)
FG-K28215-KW Iron HR ECON Comparator 0-10/0-3.33 ppm Fe 50 2 X 65ml
BI-K21331 Iron Test Strips 0-5 ppm Fe 25 1 pack